Servo Press FAQ
Answers on press sizing, force, tooling, sample trials and line integration.
Application and frame selection
What parts can a servo press assemble?
Typical applications include bearings, bushings, shafts, motor components, and housings. Suitability depends on material, fit tolerance, insertion depth, and fixture support.
What information should I send for an engineering review?
Send a shareable part drawing or photo, material and hardness, fit dimensions, target depth or force, cycle time, and acceptance criteria.
Should I choose a press based on tonnage alone?
Estimate load from the part and sample tests, then check usable stroke, fixture stack height, table dimensions, speed, and site conditions.
How do I choose between a C-frame and a four-column press?
A C-frame typically allows front loading. A four-column frame can suit larger fixtures and multiple support points. Check load position, changeovers, and maintenance access.
Reference specifications and controls
What is the maximum force of the reference 3T C-frame press?
The reference specification lists 3,000 kgf, approximately 29.4 kN. Confirm the final equipment configuration with sample tests.
What are the stroke and table size of the reference C-frame press?
The reference lists 200 mm maximum travel, a 350 × 290 mm table, and 300 mm top-platen-to-table clearance.
What are the reference dimensions and force of the four-column press?
The reference lists 30 kN maximum force, 200 mm maximum travel, a 450 × 350 mm table, and 450 mm head-to-table clearance. Approved project drawings govern delivery.
How should I read the repeatability specifications?
The two reference specifications list 0.01 mm displacement repeatability and 0.5% of full scale for force repeatability. Verify these values for the specific range, operating conditions, and test method.
Does the press support multiple stages?
The reference specifications describe approach, detection, pressing, buffering, dwell, and return. Available stages and settings vary by control configuration.
What stop modes are available?
The reference specifications describe position, force, and combined modes. In combined mode, the first configured limit reached stops pressing. Confirm behavior for the selected program.
Monitoring and line integration
What can a force–displacement curve show?
It can show contact position, increasing load, peak force, and the end of the stroke. Use representative samples to define acceptance windows.
Can it classify parts as OK or NG?
An appropriately configured monitoring system can classify a cycle against an agreed window. Verify both the window and the response with good and defective samples.
Can I export press data?
The reference configurations include USB storage. Confirm output format, fields, retention period, and part traceability with the selected model.
Can the press connect to our MES?
The four-column reference includes an MES interface. Agree on communication method, data fields, part identifiers, work orders, and exception handling before integration.
Can the system detect a misplaced part?
Part-position detection and mechanical fixture error-proofing can be evaluated. Verify the sensing method using representative wrong-position samples.
Does the press support a dwell stage?
The reference configurations support dwell settings. Provide target force or displacement, duration, and allowable variation.
Tooling, samples and delivery
How are the press tool and fixture selected?
Match the contact face to the part material and geometry. Confirm locating references, load path, tooling clearance, and how the fixture will be removed.
What power supply is required?
Both reference documents specify 220 V / 50 Hz. Confirm the actual power supply and installation conditions using the selected machine's electrical drawing.
Can you evaluate our samples?
Contact the engineering team about sample quantity, trial objectives, tooling, and deliverables. Define target dimensions, appearance, final function, and curve requirements.
How can I reduce marking or deformation?
Review tool contact, support, alignment, stage speeds, and stop conditions together. Check representative samples for indentation and deformation.
Can the equipment use automatic loading or multiple stations?
We can evaluate the requested cycle time, loading orientation, fixtures, space, and line interface. Confirm final operation through integration tests.
How is cycle time confirmed?
Include loading, positioning, pressing, holding, return, and unloading. Provide the target output and loading method so the cycle can be checked in trials.
How do I confirm price and lead time?
Send your application requirements. Formal technical and commercial documents confirm quotation, lead time, support, and acceptance conditions.
Where can I find drawings and product resources?
Engineering resources include reference layouts and the dual-table riveting proposal. Project-specific drawings reflect the configuration agreed with your team.

